SEMIN - AIRLESS 3 IN 1 25KG State of the art airless coating
State of the art airless coating, ready to use, bright white and with great coverage and a deep, dry, matt finish.
• 3-in-1
• White with good coverage
• Even appearance without smoothing
• No spray patterns or films in corners
• No cracking
• No trickling
• Remains matt in low-angled light
SEMIN AIRLESS 3 IN 1 is an indoor filler that can be used as an Airless spray.
It provides an even appeareance without smoothing, has great coverage and a deep matt finish.
It combines 3 actions : underlayer, filler and finish.
Acrylic emulsion resin, mineral content, cellulose derivates, preservation agent and other additives.
The resulting paste is a bright white colour and its consistency is adapted to its airless application.
Acceptable surfaces AIRLESS 3 IN 1 is sprayed onto plaster boardsse that have been carefully grounted, reviewed and dusted, or to any other smooth surface.
The SEMIN AIRLESS 3 IN 1 layers can be applied with an acrylic or gloss paint.
DTU 59.1
• Dry extract : 68%
• Density : 1,76
• COV : <1g/l
tubs 25 kg.
6 months, away from frost, in original unopened PACK SIZE.
DO NOT APPLY IN TEMPERATURES BELOW +8°C OR >ABOVE +35°C, OR TO FROZEN SURFACES.
Surfaces must conform to DTU 59.1 i.e, they must be dry, clean, hard, without any traces of the parting agent.
SEMIN AIRLESSS 3 IN 1 can be sprayed with all kinds of Airless machines adapted to srpraying coatings. Recommended nozzle : 627.
For optimum results, we recommend following this method :
• Spray a first layer of the coating about 300 to 400 g/m2, to show up the defects on the surface. Spray at a distance of about 80 cm from the relevant surface
• Check over the surface carrefully
• Spray the final layer of about 1,2 kg/m2
This coating does not need smoothing.
1,2 to 1,5 kg/m2.
6 to 24 hours depending on the amount applied.
Do not dilute.